Dynamic fatigue testing machine
Electronic universal testing machine
Electro-hydraulic servo universal testing machine
Automated test scheme
Pendulum impact testing machine
Drop hammer impact testing machine
High temperature creep endurance testing machine
Horizontal testing machine
Special testing machine
Standard machine
Spring testing machine
Electric insulator testing machine
Fastener testing machine
Equipment summary:
The automatic electronic tensile testing machine can realize the control mode of stress rate, strain rate and displacement rate,The smooth conversion between several control modes can be realized in one test.Load, speed, strain, displacement and other parameters can be displayed in real time.The curve can be segmented amplification and analysis;Error in input data for sample number, size, etc,It can be modified and calculated again,Replace the original incorrect data。
It can realize automatic mass test function。The automatic sampling manipulator picks up the sample from the sample holder,After adjusting position,Delivery to measuring device,Automatically measure the sample diameter at both ends of the test section and at the middle three positions,And automatically input the system's computer;Automatic calculation of scale distance;Then the sample is automatically sent to the fixture of the testing machine,Automatic clamping;The extensometer automatically clamps the sample at a calculated or predetermined scale,And track the whole stretching process,Until it breaks;Scrap sample recovery robot automatically takes off the sample,Put back to the corresponding position of the sample rack;The beam automatically returns to its original position。
With automatic protection function。When the test load exceeds the maximum load of the sensor;When the position and state of the sample do not meet the requirements of sample delivery;When the recovery device does not pick up the post-fracture sample;When the fixture is not effectively opened and closed;When the extensometer position is wrong;And any other situation affecting the safety of test data or instruments and personnel,The testing machine automatically alarms and stops。
Meet the criteria:
GB/T 2611 "General Technical Requirements for Testing Machine"
GB/T 16826 "Electro-hydraulic Servo universal Testing Machine"
JJG 2063 "Electro-hydraulic Servo Universal Testing Machine"
GB/T 228.1 "Metal materials tensile test - Part 1: Test method at room temperature"
GB/T 16825.1 "Static uniaxial testing machine test Part 1: tension and (or) pressure testing machine test and calibration of the force system"
Technical indicators:
型号 | TSE255D-AR | ||
主机 | Maximum test force | 250kN | |
Force range | 0.4%-100%FS | ||
Accuracy class | 0.5级 | ||
Relative error of test force indication value | ±0.5% | ||
Indicates the maximum relative error of the return path | ±0.75% | ||
Maximum relative error in indicating repeatability | ±0.5% | ||
Test force resolution | 0.6N | ||
Overload protection | 120% | ||
Relative error of displacement indication | ±0.5% | ||
Displacement resolution | 0.033µm | ||
Force control speed adjustment range | 0.005 ~ 5% FS/S | ||
Relative error of force control speed | Within ±1% of the set value | ||
Horizontal test space | 650mm | ||
Vertical test space | 700mm | ||
Beam speed adjustment range | 0.005 to 500mm/min | ||
Relative error of beam speed | 速率<0.At 01 mm/min, set the value ±1.0%以内; 速率≥0.At 01 mm/min, set the value ±0.2%以内; | ||
Constant force, constant displacement control range | 0.5% to 100% FS/s | ||
Constant force, constant displacement control accuracy | When the set value is ≥ 10% FS, the set value is ±0.1%以内; When the set value is < 10%FS, within ±1% of the set value; | ||
Fully automatic extensometer | 纵向 | Range of scale | 15-205mm |
Scale error | <0.5%或0.1mm, take the maximum value | ||
deflection | 80mm | ||
Resolving power | 0.0005mm | ||
Clamping range | 2 - Φ Φ 40 mm | ||
Accuracy class | 0.5级 | ||
Pneumatic shoulder jig | Clamping mode | Shoulder, pneumatic top tight | |
Centering accuracy | 0.2mm | ||
试样 | 直径Φ10mm-Φ14mm,平行段长度>55mm;夹持段长度大于20mm | ||
Specimen holder | Maximum sample quantity | 60 | |
Number of sample racks | 4 | ||
The number of samples in a single row sample rack | 15 | ||
Sample length | 120-250mm | ||
Waste specimen | Maximum number of waste samples | 60 | |
Number of scrap trays | 4 | ||
Number of samples per scrap tray | 15 | ||
Mechanical arm | Robot type | ABB joint robot | |
负载 | 6kg | ||
Maximum working radius | 1450mm | ||
Repeated positioning accuracy | 0.02mm |
Sweep for immediate attention
Copyright @ Shenzhen wance Test Equipment Co., Ltd. Copyright(C)2024 wance Technologies Ltd.
All Rights Reserved Guangdong ICP number 15055763