Dynamic fatigue testing machine
Electronic universal testing machine
Electro-hydraulic servo universal testing machine
Automated test scheme
Pendulum impact testing machine
Drop hammer impact testing machine
High temperature creep endurance testing machine
Horizontal testing machine
Special testing machine
Standard machine
Spring testing machine
Electric insulator testing machine
Fastener testing machine
Equipment Overview:
The main machine of the micro-computer-controlled oil-electric hybrid servo pressure testing machine adopts the frame type integral casting structure after finite element analysis, and the whole machine has good rigidity。Oil-electric hybrid pressure testing machine with closed loop force control,With constant stress control and load holding function;Adopt imported gear pump and servo motor,Quick response,hypopyrexia,Low noise,High control precision,Within the range permitted by the testing machine,Users can arbitrarily set the loading speed according to the requirements of the test;High precision load sensor is used in the force measuring system,It can fully ensure the accuracy and reliability of the test.This series of testing machine is suitable for compressive strength test of cement, concrete and rock,With proper fixture and measuring device, it can also meet the splitting test and static pressure elastic modulus test of concrete,Multiple displacement measurement channels can be extended according to user requirements。
Meet the criteria:
GB/T 2611 "General Technical Requirements for Testing Machine"
GB/T50081 Standard for Test method of Mechanical Properties of ordinary Concrete
JJG 139 "Tensile, pressure and universal testing machine verification Regulations"
Technical parameters:
型号 | HCT605E HCT106E HCT206E HCT306E |
Maximum test force | 600kN 1000kN 2000kN 3000kN |
Accuracy class | 0.5级 |
Relative error of test force indication value | ±0.5%以内 |
Test force measurement range | 1%-100% FS (full ungraded) |
Test force resolution | 1/500000FS |
Distance between columns | 460mm 540mm |
Upper and lower pressure plate distance | 330 mm |
Upper and lower pressure plate distance adjustment mode | Plate adjustment |
Piston direction control | Two-way cylinder |
Platen size | Φ 250 mm |
Piston stroke | 50mm |
Maximum speed of piston rise | 90mm/min 54mm/min 34mm/min |
Main engine dimensions | 600x410x1350mm 700x530x1505 mm |
Oil source dimensions | 825x600x915mm |
电源 | AC 220V±10%, 50Hz, 1.5kW |
Main engine weight | 2000kg 2500kg |
This series of testing machine is suitable for cement, concrete, rock compressive strength test, with appropriate fixture and measuring device can meet the concrete splitting test, bending test, static pressure elastic modulus test。Guangzhou Zengcheng Zhengyuan construction engineering quality testing center used the testing machine。
Sweep for immediate attention
Copyright @ Shenzhen wance Test Equipment Co., Ltd. Copyright(C)2024 wance Technologies Ltd.
All Rights Reserved Guangdong ICP number 15055763